Shop
Showing 1–24 of 69 results
-
-
Motors | Drivers | Pumps | Actuators
150 RPM Single Shaft BO Motor – Straight
- Speed: 150 RPM (no load)
- Operating voltage: 3V–12V DC (optimal at 6V)
- Dual shaft design for flexibility (ideal for encoders)
- Straight shaft orientation for easy alignment
- Compact and lightweight plastic gear motor
- Low power consumption
- Easy to mount with standard motor brackets
SKU: 17010001 -
Displays, LCD
16×2 (1602) Character LCD Display – Green Backlight
- 16 Characters × 2 Lines Display Format
- Bright Green LED Backlight for High Readability
- HD44780-Compatible Controller
- 4-bit or 8-bit Parallel Interface
- Standard 16-pin Interface
- Low Power Operation (5V)
- Optional Soldered or Unsoldered Header Pins
SKU: 11010001 -
Displays, LCD
16×2 (1602) Character LCD Display with I2C/IIC interface – Blue Backlight
- 16 characters x 2 lines display
- Blue backlight with white text for high visibility
- I2C/IIC interface (uses only 2 pins)
- Compatible with Arduino, ESP8266, ESP32, STM32, and Raspberry Pi
- Fully supported by open-source libraries like LiquidCrystal_I2C
- Operating voltage: 5V
- Contrast adjustable via onboard potentiometer
SKU: 11010003 -
-
JST Connectors, Switches and Connectors
2 Pin JST XH Male Connector – 2.50mm Pitch
- 2-pin male connector with 2.50mm pitch
- JST XH-compatible design
- Through-hole mounting for secure PCB integration
- Durable plastic housing with strong pin grip
- Ideal for low-power, signal, and sensor connections
SKU: 18120001 -
JST Connectors, Switches and Connectors
2515 JST-XH Crimp Terminal Female Pins
- Crimp terminals for JST-XH connector housings
- Supports 2.50mm pitch connections
- Made from high-conductivity metal for secure signal transfer
- Compatible with most crimping tools
- Suitable for DIY projects, repair work, and prototyping
SKU: 18120007 -
JST Connectors, Switches and Connectors
3 Pin JST XH Female Connector – 2.50mm Pitch
- 3-pin female connector with 2.50mm pitch
- JST XH-compatible design
- Through-hole mounting for secure PCB integration
- Durable plastic housing with strong pin grip
- Ideal for low-power, signal, and sensor connections
SKU: 18120004 -
JST Connectors, Switches and Connectors
3 Pin JST XH Male Connector – 2.50mm Pitch
- 3-pin male connector with 2.50mm pitch
- JST XH-compatible design
- Through-hole mounting for secure PCB integration
- Durable plastic housing with strong pin grip
- Ideal for low-power, signal, and sensor connections
SKU: 18120003 -
Modules, Relay Modules
4 Channel 5V Relay Module with Optocoupler
- 4-channel 5V relay board with opto-isolation
- Relay rating: 10A 250VAC / 10A 30VDC
- Optocouplers for electrical isolation and protection
- Active-low trigger inputs (compatible with 3.3V/5V logic)
- Status indicator LEDs for each relay
- Screw terminals for relay outputs
- Works with Arduino, ESP32, Raspberry Pi, STM32, and more
- Ideal for home automation, robotics, and industrial control
SKU: 14100002 -
JST Connectors, Switches and Connectors
4 Pin JST XH Female Connector – 2.50mm Pitch
- 4-pin female connector with 2.50mm pitch
- JST XH-compatible design
- Through-hole mounting for secure PCB integration
- Durable plastic housing with strong pin grip
- Ideal for low-power, signal, and sensor connections
SKU: 18120006 -
JST Connectors, Switches and Connectors
4 Pin JST XH Male Connector – 2.50mm Pitch
- 4-pin male connector with 2.50mm pitch
- JST XH-compatible design
- Through-hole mounting for secure PCB integration
- Durable plastic housing with strong pin grip
- Ideal for low-power, signal, and sensor connections
SKU: 18120005 -
Jumper Wires
40 Pin Female to Female Jumper Wires (20 cm)
- Connector type: Female to Female
- Pin count: 40 wires
- Wire length: 20 centimeters each
- Compatible with breadboards, Arduino, Raspberry Pi, ESP modules, and other header pins
- Flexible, insulated wires with durable Dupont connectors
- Color-coded wires for easy circuit management
- Ideal for prototyping, testing, and temporary wiring
SKU: 21040002 -
Jumper Wires
40 Pin Female to Male Jumper Wires (20 cm)
- Connector type: Female to Male
- Number of wires: 40 pins
- Wire length: 20 centimeters each
- Compatible with breadboards, Arduino, Raspberry Pi, ESP modules, and more
- Flexible, insulated wires with high-quality Dupont connectors
- Multi-color wires for easy identification and neat wiring
- Suitable for prototyping, testing, and DIY electronics
SKU: 21040003 -
Jumper Wires
40 Pin Male to Male Jumper Wires (20 cm)
- Connector type: Male to Male
- No. of Pins: 40
- Compatible with breadboards, Arduino, Raspberry Pi, ESP8266/ESP32, and other modules
- Flexible, insulated wires for easy handling and durability
- Available in assorted colors for easy identification
- Ideal for prototyping, testing, and temporary connections
- Lengths: 20 cm
SKU: 21040001 -
Motors | Drivers | Pumps | Actuators
65mmX28mm Robotic Rubber Tyre Wheel for BO Motors Yellow Colour
- Diameter: 65mm
- Width: 28mm
- Compatible with BO series motors
- Durable rubber tire for high traction
- Lightweight plastic hub for smooth performance
- Bright pink colour for a vibrant look
- Easy press-fit installation with standard motor shafts
SKU: 17060001 -
Power Modules, Sensors, Solar
6V 80mA Mini Solar Panel 80mm Round for DIY Project
- Rated voltage: 6V DC
- Rated current: 80mA
- Compact round design, 80mm diameter
- Lightweight and durable construction
- Ideal for low-power DIY solar projects and educational kits
- Suitable for charging small batteries and powering microcontroller projects
- Easy to connect with standard solar charge controllers or circuits
SKU: 15040001 -
Soldering & Accessories
840 Points Solderless Breadboard
- 840 tie points (full-size layout)
- Solderless and reusable – no need for soldering
- Includes dual power rails on both sides
- Compatible with DIP ICs, jumper wires, and sensors
- Self-adhesive backing and mounting holes for easy placement
- Interlocking design to expand with additional breadboards
- Durable ABS plastic body with strong internal spring contacts
SKU: 19020002 -
Compatible with Arduino, Development Boards
Arduino nano CH340 Chip Board without USB cable (Soldered)
Compatible with Arduino, Development BoardsArduino nano CH340 Chip Board without USB cable (Soldered)
- ATmega328P Microcontroller
- CH340 USB-to-Serial Interface
- 22 Total I/O Pins (14 Digital, 8 Analog)
- 6 PWM Outputs, I2C & SPI Support
- Operating Voltage: 5V | Input Voltage: 7–12V DC
- Fully Compatible with Arduino IDE
- Soldered Header Pins – Ready to Use
SKU: 10010003 -
Communication Cables
Arduino Nano USB Cable (USB A to Mini)
- Connector type: USB A (male) to Mini USB (male)
- Compatible with Arduino Nano and other Mini USB devices
- Supports data transfer and power supply
- Compact, flexible, and durable cable design
- Ideal for makers, hobbyists, students, and professionals
- Length options available (specify length if needed)
SKU: 21010002 -
-
Compatible with Arduino, Development Boards
Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
Compatible with Arduino, Development BoardsArduino UNO R3 SMD Atmega328P Board – Clone Compatible Model
- ATmega328P SMD Microcontroller (pre-soldered, space-saving design)
- Fully Arduino UNO R3 Compatible
- 14 Digital I/O Pins (6 with PWM output)
- 6 Analog Inputs | 16 MHz Clock Speed
- CH340G USB-to-Serial Converter
- Operating Voltage: 5V | Input Voltage: 7–12V DC
- Compact & Durable SMD Design
SKU: 10010002 -
Communication Cables, Development Boards, Wires & Cables
Arduino Uno/Mega USB Cable (USB A To B)- 20CM
Communication Cables, Development Boards, Wires & CablesArduino Uno/Mega USB Cable (USB A To B)- 20CM
- Cable type: USB A (male) to USB B (male)
- Length: 20 centimeters
- Compatible with Arduino Uno, Arduino Mega, and other USB B devices
- Supports data transfer and power supply
- Durable, flexible cable with secure connectors
- Compact length ideal for clutter-free workspaces
SKU: 21010001 -
Motors | Drivers | Pumps | Actuators
BO motor wheels 4.5×1.2 cm With Rubber Grip
- Size: Diameter 4.5 cm, Width 1.2 cm
- Compatible with standard BO motors
- Rubber grip for better traction and control
- Durable plastic construction with press-fit design
- Lightweight and easy to assemble
- Ideal for small robotic and automation projects
SKU: 17060002
